Preparation Of The Patient - Progetti EPG View/Par. C./ Int. User Manual

3.7 SECONDARY OPERATIONAL MODES CHANGE
Using the menu options it is possible to access the secondary operational
parameters as follows:
pushing the key Menu (F
F ; F ; F
1 2 3.
 First Menu:
- Standard (F
- Grid Off (F
- 3 Leeds (F
 Second Menu:
- Base 1 (F
- Base 2 (F

keys.
- Base 3 (F
 Third Menu:
- Table (F
- Frame (F
- Clamp (F
- Fourth Menu: for turning on the Filters as the key
operational modes).

3.8 PREPARATION OF THE PATIENT

For a high quality ECG recording good preparation of the patient and correct
positioning of the electrodes is necessary.
 The patient should be relaxed and the room temperature must be above 20
deg. centigrade to avoid the ecg signal to be disturbed by muscle tremors.
 Clean the skin where the electrodes will be placed with alcohol.
 Make sure that during recording the patient does not touch another person or
conductive objects.
3.9 ELECTRODES APPLICATION
Apply a small quantity of conductive gel on the part of the skin where the
electrodes will be placed (not necessary if disposable electrodes with pre-applied
gel are used).
PROGETTI S.r.l. - Via B. Buozzi, 28 10024 Moncalieri (To) Italy – www.progettimedical.com - info@progettimedical.com
), different menus will be displayed according to the keys
4
): for turning on the Standard or Cabrera modality.
1
): for turning on/off the hardcopy grid.
2
): for one or three traces display/print.
3
): enables the first trace base line shift using the
1
): enables the second trace base line shift using the
2
): enables the third trace base line shift using the
3
) : for turning on/off the Patient Data Table.
1
): to set the hardcopy frame length to 5/10 sec.
2
): to reset the base lines when the electrodes are disconnected
3
or in case of excessive shift of the traces.
EPG View USER MANUAL V. 03-10 Pag. 7
≈
 
and keys.

and
 
and keys.
alternative (v. Main