AEG 43036IW-MN User Manual page 12

12 www.aeg.com
5.9 Timer
Count Down Timer
Use the Count Down Timer to set how
long the cooking zone operates for only
this one time.
Set the Count Down Timer after the
selection of the cooking zone.
You can set the heat setting before or af-
ter you set the timer.
• To set the cooking zone: touch
again and again until the indicator of a
necessary cooking zone comes on.
• To activate the Count Down Timer:
touch
00 99
-
of the cooking zone start to flash slow,
the time counts down.
• To see the remaining time: set the
cooking zone with
of the cooking zone starts to flash
quickly. The display shows the remain-
ing time.
• To change the Count Down Timer:
set the cooking zone with
or
• To deactivate the timer: set the
cooking zone with
remaining time counts back to
The indicator of the cooking zone
goes out. To deactivate you can also
touch
When the countdown comes to an end,
the sound operates and
cooking zone deactivates.
• To stop the sound: touch
of the timer to set the time (
minutes). When the indicator
. The indicator
.
. Touch
and at the same time.
00
flashes. The
CountUp Timer ( The count up
timer)
Use the CountUp Timer to monitor how
long the cooking zone operates.
• To set the cooking zone (if more
than 1 cooking zone operate ) :
touch
dicator of a necessary cooking zone
comes on.
• To activate the CountUp Timer:
touch
When the indicator of the cooking
zone starts to flash slow, the time
counts up. The display switches be-
tween
• To see how long the cooking zone
operates: set the cooking zone with
. The indicator of the cooking zone
starts to flash quickly. The display
shows the time that the cooking zone
operates.
• To deactivate the CountUp Timer:
set the cooking zone with
touch
er. The indicator of the cooking zone
goes out.
Minute Minder
You can use the timer as a Minute Mind-
er while the cooking zones do not oper-
ate. Touch
timer to set the time. When the time
comes to an end, the sound operates
00
and
• To stop the sound: touch
. Touch
5.10 Stop and Go
The Stop and Go
. The
cooking zones that operate to the lowest
00
.
heat setting (
This function does not deactivate the
timer function.
• To activate this function, touch
The display shows the symbol
• To deactivate this function, touch
The display shows the heat setting
that you set before.
again and again until the in-
of the timer
and counted time (minutes).
or to deactivate the tim-
. Touch or
flashes.
function sets all
).
When the Stop and Go function
operates, you cannot change the
heat settings.
comes on.
and
of the
.
.
.