Detaching - Tarter RC306BL Operation And Assembly Manual

D E T A C H I N G
DETACHING CUTTER FROM TRACTOR
To prevent personal injury caused
by unexpected movement:
CAUTION
a. Park machine on a level surface.
b. Engage tractor parking brake
and/or place transmission in
Park.
c. Disengage PTO.
d. Shut off tractor engine and
remove key.
1. Park cutter on a level surface, or block
tail wheel so machine cannot roll after
detaching from the tractor.
2. Slowly push hitch control lever to lower
cutter close to the ground.
3. Engage tractor parking brake and/or
place transmission in Park.
Shut off tractor engine before
detaching PTO driveline.
Entanglement in rotating
DANGER
driveline can cause serious injury
or death.
4. Shut off tractor engine and remove key.
5. Raise tractor PTO shield, if equipped.
IMPORTANT:
Do not use plastic shield on
driveline to hold driveline in position. Damage
to shielding can occur.
32
6. Push pin in and slide driveline off tractor
shaft.
7. Support and collapse driveline completely
and lower onto PTO holder or onto mower
deck.
8. Lower tractor PTO shield, if equipped.
TRACTOR WITH THREE-POINT HITCH
Remove quick-lock pins from hitch pins
1.
and install in storage position on tractor
draft links.
2. Remove and lower tractor draft links from
hitch pins.
3. Disconnect center link from mast straps.
Position tractor center link in transport
location. Reinstall center link pin/
hardware.
4. Carefully drive tractor away.