Table of Contents
Advertisement
DETACHING
1. Put the ATV/UTV in PARK and set the parking
brake.
2. Disengage the Axle Locking Lever to prevent the
spreading drum from turning.
3. Remove the cotter pin, then remove the hitch
pin.
4. Disengage the ATV/UTV parking brake and
slowly drive away from the Manure Spreader.
MAINTENANCE
1. Grease all four grease fittings before every use.
Two fittings are underneath the spreader and
two on each side of the agitator, outside the
hopper.
2. Use a typical spray nozzle on a garden hose
to wash debris from the hopper—cleaning
the hopper after each use keeps manure and
debris from clogging the spreading drum and
damaging the spreader.
3. Check the rubber guard after every use and
replace as needed.
DETACHING / MAINTENANCE /
STORAGE
1. Clean any manure and debris from the spreading
drum and hopper before storing the spreader.
2. Store the Manure Spreader on a level surface,
free of debris, and in an area away from human
and livestock activity.
3. Take adequate measures to keep the Manure
Spreader dry and protected from the weather.
4. Store the manure spreader standing up against
a secure wall or with the tongue raised and the
rear panel of the hopper resting on the ground.
Lean spreader against a secure wall.
Rest spreader on rear panel.
STORAGE
8
Advertisement
Table of Contents
