Table of Contents
Advertisement
L U B R I C A T I O N A N D M A I N T E N A N C E
(continued from previous page)
LUBRICATION BEFORE EACH USE
1. Driveline Universal Joints
a. Apply multi-purpose grease with a grease
gun.
2. Driveline Guard
b. Apply 2-3 shots of multipurpose grease
with grease gun to plastic fitting.
3. Driveline Profile
c. Disconnect PTO Driveline.
d. Pull two sections apart.
e. Apply thin coat of multi-purpose grease
to inside of female section.
f. Re-assemble sections.
(2) Before Each Use
(1) Before Each Use
24
(3) Before Each Use
3d. Pull two sections apart.
NOTE: Pull each section to be sure driveline
and shields are securely connected. Make
certain PTO shielding is in good condition. Do
not grease outer or inner plastic shields.
4. Tail wheel Pivot Tube
g. Apply multi-purpose grease with grease
gun.
5. Tail wheel
h. Apply multi-purpose grease with grease
gun.
6. Gearbox
i. Check oil level by removing oil level check
plug on side of gearbox.
j. Add 85W-90 gear oil if necessary to bring
oil level to check plug hole.
(6) Before Each Use
(4) Before Each Use
(5) Before Each Use
Advertisement
Table of Contents
