Table of Contents
Advertisement
A S S E M B L Y
CUTTER ASSEMBLY
1. From shipping position you will first
remove chain guards, PTO Shaft, and
Slip Clutch shield by cutting zip ties
underneath cutter. Set these 4 items aside.
12
2. Remove hardware kits from manual holder
and set aside.
3. Remove bolts/nuts from shipping stands
using 9/16" socket.
4. Wrap lifting strap or chains around cutter
rear support frame and attach to hoist or
lifting device. Lower machine on to wooden
blocks.
Help prevent bodily injury ensure
cutter is stable in all directions and
blocks cannot tip over.
DANGER
Advertisement
Table of Contents
