Table of Contents
Advertisement
User Manual
Virtual Medium
Manage Virtual Medium/ Drive Redirection: Opens the Virtual Medium dialog box. Select the Hard
Disk, DVD/CDROM drive or ISO file and click Connect. See details below.
Status: Show current Virtual Media connection status.
Hard Disk or CD ROM Drive (Windows viewer only): Redirect and map a local drive onto the attached
computer. Check Enable Write Accesses if you want to allow the computer to write on the Virtual
Media.
ISO Image File: File in ISO format that can be mapped onto the attached computer. This file will appear
as a removable mass storage device.
Disconnect Button: Release the Virtual Media connection and mapping.
Connect: Click to establish the Virtual Media connection and mapping (time to link the file depends on
its size).
Close: Close the dialog box (closing the dialog box does not release the mapping of the Virtual
Medium).
Resolution Configuration
There are several aspects that have to be taken into consideration when configuring your
computer/server for the best video performance:
•
Choose a standard resolution supported by the IPKVM.
Turn off special transition effects on your operating system such as fade.
•
Leave enough bandwidth on the network for the IPKVM to operate.
•
IPKVM supports the following video resolutions:
English
Advertisement
Table of Contents
