Table of Contents
Advertisement
User Manual
English
Users
Local Database
In this page you can list, edit, add, or remove user accounts that can access the product. These users
are stored in the local database of the unit, they need no external access to an authentication server. In
case of conflict, the information in the local database has higher priority than the information provided by
the possible authentication server.
IMPORTANT: Change the super user password immediately after you have installed your KVM IP
Access. Failing to change the password for the super user is a severe security risk and could result in
unauthorized access to the unit and to the host system. Please also make sure to store your new
password in a secure place where can always be recited when required!
Remote Server
In this page you will enable or disable the usage of a centralized server running a Radius service or
hosting a directory that can be accessed through the LDAP protocol (Active Directory for example). This
server can be interrogated each time a user tries to connect to the unit. Its responses grant or reject the
connection attempts. This feature allows integrating the KVM IP Access into a more global enterprise
management of users. By default, the Remote Authentication is configured as None, i.e., all remote
authentications are disabled. In this case, the authentication is all done locally by using the User
database.
Advertisement
Table of Contents
