Advertisement
Quick Links
KVM Extender DVI & USB 2.0
English Manual
This manual covers the DVI & USB 2.0 KVM Extender family:
Transmitters (TX)
Receivers (RX)
39200: DVI & USB 2.0 Transmitter with HDMI connectors
39201: RX with HDMI connectors, USB 2.0 without
39210: DVI & USB 2.0 Transmitter with DVI connectors
Storage
39202: RX with HDMI connectors, USB 2.0 with Storage
39240: DVI & USB 2.0 Transmitter with DVI connectors and
39211: RX with DVI connectors, USB 2.0 without Storage
Fiber Optic connection
39212: RX with DVI connectors, USB 2.0 with Storage
39213: RX with DVI connectors, USB 2.0 without Storage,
with Audio Option
39214: RX with DVI connectors, USB 2.0 with Storage and
Audio Option
39241: RX with DVI connectors, USB 2.0 without Storage,
with Fiber Optic connection
As well as all further models under special make numbers with activated options and combination of options
Tested to comply with FCC Standards
FOR COMMERCIAL USE ONLY!
1
© LINDY – Fifth Issue (SEP 2015)
No. 39200 - 39202, 39210 - 39214, 39240, 39241
Advertisement
Related Manuals for Lindy 39200
Summary of Contents for Lindy 39200
- Page 1 This manual covers the DVI & USB 2.0 KVM Extender family: Transmitters (TX) Receivers (RX) 39200: DVI & USB 2.0 Transmitter with HDMI connectors 39201: RX with HDMI connectors, USB 2.0 without 39210: DVI & USB 2.0 Transmitter with DVI connectors Storage 39202: RX with HDMI connectors, USB 2.0 with Storage...
-
Page 2: Introduction And Features
Mass Storage support - this option can be upgraded if required via paid unlock code (SN based) - please contact LINDY support. LINDY support also can provide additional information for various mounting kits. -
Page 3: On-Screen Menu
Extender off/on and try again. Menu item "U" is used to perform a firmware update. The firmware is available on request at the LINDY tech support. Menu item "M" indicates the installed options. The USB mass storage support may temporarily be switched off if installed. To change the options, you must purchase a fee-based activation code dependent on the device ID for each RX. - Page 4 Menu item "G" - Extender settings: this menu leads to another further submenu of other settings: Sub-menu item "V" - VGA digitization settings. When the VGA option is enabled a VGA input signal can be digitized automatically and manually. The M command toggles between Auto-detect / DVI / VGA.
- Page 5 Network and Matrix Switching Menu and Options The matrix KVM Switching option has been added to this KVM extender series in 2015. It is available as a fee-based option and is activated via an unlock code. Older extender boxes require an additional firmware update to enable their switching option.
- Page 6 Master View Menu "U" – User List. Administration of users and user groups. User: Define a login name and password up to 16 characters. Full Name: assigns the full name of the user. This full name is shown to other users, when this user interrupts their connection.
- Page 7 Master View Menu "S" – Computer Extender List. Shows all computers in the system and their group assignment and status. Also here a name can be given via the Info menu, the group assignment is done by entering the numbers 1 to 8. Master View Menu "H"...
-
Page 8: Troubleshooting
The key X logs out, the key D interrupts the recent connection to the selected computer. Trouble shooting If you cannot solve problems with this Extender please contact our support. You can reach us worldwide at the numbers listed on our website. Or send us an email to support@lindy.com. Legal Information Hersteller / Manufacturer (EU): LINDY Electronics Ltd.