Before Proceeding - biodex 058-820 Instructions For Use Manual

Before Proceeding

NOTE: The cautions and instructions provided in this manual must be read,
followed, and kept available for consultation at all times. Observing the
information, instructions and procedures presented throughout this manual is
essential for using this product both properly and safely.
SPECIFIC CAUTIONS
Allow only qualified, trained personnel to operate or service this product.
●
If the equipment is used in a manner other than specified in this operation
●
manual, the protection provided by the equipment may be impaired and
results could be compromised.
Never leave patient unattended on device.
●
CAUTION: Unauthorized modifications to this product are not permitted and will
void the manufacturer's warranty. Unauthorized modification of the product may
result in a hazard to the user and/or patient. Do not modify this equipment
without authorization from the manufacturer.
CAUTION: If this equipment is modified, appropriate inspection and testing must
be conducted to ensure continued safe use of equipment.
NOTE: Any serious incidents occurring with the use of this device should be
reported to the manufacturer and appropriate local regulatory agency by end
user, operator, or patient. Examples of local regulatory agency are EU competent
authority, country specific Health Agency, or FDA.
Training
This operation manual includes assembly and operating instructions. Operating/assembly
questions can be directed to the Imaging Table Sales Department at sales@biodex.com.
Operating Conditions
Temperature: 10° C to 30° C (50° F to 86° F).
●
Humidity Range: 30% to 70% (non-condensing).
●
Atmospheric Pressure: 70kpa (10psi) to 106kpa (15psi).
●
Transport and Storage Conditions
Temperature: -20° C to 70° C (-4° F to 158° F).
●
Humidity Range: 10% to 100%.
●
Atmospheric Pressure: Sea Level 101kpa (14.7psi) to 10,000 feet, 69 kpa (10.1
●
psi).
6