Setup Menu - Endress+Hauser Levelflex FMP51 Operating Instructions Manual

Description of device parameters (operating menu)
Factory setting
Display interval
Navigation
Description
Input range
Facotry setting
Operating mode
Navigation
Conditions
Description
Selection
Factory setting
Distance unit
Navigation
Description
144
30 %
Display/operation ® Display interval
Setup ® Advanced Setup ® Display ® Display interval
Use this function to set the length of time the measured values are displayed if the values
alternate on the display. This type of alternating display only occurs automatically if the number of
measured values defined exceeds the number of values the selected display format can display
simultaneously.
• The Value 1 display - Value 4 display parameters are used to specify what measured
values are shown on the display (® ä 179).
• The display format of the displayed measured values is specified using the Format display
parameter (® ä 141).
1 to 10 s
5 s
19.2

Setup menu

Setup ® Operating mode
Only visible for devices with interface measurement application package (product structure:
Feature 540 Application package , Option EB Interface measurement ).
Defines the operating mode
• Level
• Interface
Level
Setup ® Distance unit
Defines the distance unit
Levelflex FMP51, FMP52, FMP54
Endress+Hauser