Yale YDM3109+ User Manual

MUST READ
- This Product can be included and operated in any Z-Wave network with other Z-Wave certified
devices from other manufacturers and/or other applications.
All non-battery operated nodes within the network will act as repeaters regardless of vendor to
increase reliability of the network.
- This product(YDM3109+) is a Security Enabled Z-Wave Plus Product.
- Security Enabled Z-Wave Controller must be used in order to fully utilize this product.
- Network Module Setting : This setting becomes available through the Main Menu and allows the
lock to connect with Controllers.
- Reset locally : Z-Wave Module exclusion by compulsion.
Only use this when the existing Z-Wave controller is missing or inoperable.
Add
(Include)
Remove
(Exclude)
Reset
Locally
Information about association group
- Grouping: 1 available / Group identifier: 1 / Device per group: 1 device
S2 Security CCs and security level
Command Class
Alarm
Association
Association Group Info
Battery
Device Reset Locally
Door Lock
Door Lock Logging
Manufacturer Specific
Powerlevel
Alarm Report
- Alarm Type: 0x21 with Alarm Level: 0xFF is only sent when device reset locally menu("PIN#4#0#") is entered.
Controller Register
Delete
Reset Locally
Ver. Note
1 Secure
2 Secure
1 Secure
1 Secure
1 Secure
2 Secure
1 Secure
2 Secure
1 Secure
YDM3109+
Register Controller
U
Command Class
Schedule Entry Lock
Security
Security 2
Supervision
Time
Time Parameter
Transport Service
User Code
Version
Z-Wave Plus Info
Continue
Complete
Continue
Complete
Ver. Note
3 Secure
1 Non Secure
1 Non Secure
1 Secure
2 Secure
1 Secure
2 Non Secure
1 Secure
2 Secure
2 Non Secure