4. On the "CONNECT" window that opens, you will be able to view the device's network settings.
5. Select DVIP from the "Interface" drop-down menu.
6. Select your laptop's Ethernet card from the "EtherNetCard" drop-down menu, which is
192.168.100.5 in this example. If this is your first time using the device, click the "Scan" button on
the right of the "EtherNetCard" drop-down menu to search for the device on the network. While
searching, you should see the message "Scanning" at the bottom left corner of the "CONNECT"
window.
13