Brady IP™ Printer Operator/Configuration
Safety
The Brady IP Printer is configured for voltages of 100 to 240 V ~, 50 to 60
■
Hz. Connect only to a grounded power outlet.
The Brady IP Printer may only be used in a dry environment, do not expose
■
it to moisture (water, mists, etc.).
If the Brady IP Printer is operated with the cover open, ensure that clothing,
■
hair, jewelry etc. do not come into contact with the exposed rotating parts.
During the print process, the print assembly can become hot. Do not touch
■
the print assembly during operation, and allow the assembly to cool down
before changing material and before disassembly.
Perform only those actions described in this manual. Work going beyond
■
this may only be performed by trained personnel or service technicians.
A WARNING
Entanglement Hazard
• MOVING PARTS can entangle.
• AVOID wearing jewelry or loose fitting clothing.
• ALWAYS tie back long hair.
A DANGER
Electric Shock Hazard
• DO NOT open the Brady IP Printer casing.
• UNPLUG power cord before servicing.
• CONTACTING power supply can cause
electrocution.
3