Quick Start Manual
Quick Start Road Map
1. Review all safety messages .......................................................... Page 2
2. Unpack the printer and verify that all parts are included ............... Page 4
3. Connect the printer ........................................................................ Page 5
4. Install the printer driver .................................................................. Page 7
5. Install the software ....................................................................... Page 11
6. Load the ribbon ............................................................................ Page 13
7. Load the material ......................................................................... Page 15
8. Calibrate the printer ..................................................................... Page 19
Safety
The Brady IP printer is configured for voltages of 100 to 240 V ~ (50 to 60
■
Hz). Connect only to a grounded power outlet.
The Brady IP printer may only be used in a dry environment, do not expose
■
it to moisture (water, mists, etc.).
If the Brady IP printer is operated with the cover open, ensure that people's
■
clothing, hair, jewelry etc. do not come into contact with the exposed
rotating parts.
2
A WARNING
Entanglement Hazard
• MOVING PARTS can entangle.
• AVOID wearing jewelry or loose fitting clothing.
• ALWAYS tie back long hair.
A ADVERTENCIA
Peligro de enredos
• Las PIEZAS EN MOVIMIENTO pueden enredar.
• EVITE usar joyas o ropa suelta.
• Amárrese SIEMPRE el cabello largo.