Key Functions; Lcd/Menu Options - Brady BP-IP300 Operation/Configuration Manual

Control Panel

Key Functions

The up, down, left and right arrows are used for navigating in the menu.
■
The . key corresponds to the Enter key on a computer keyboard. It
■
confirms:
- Selection of a menu item.
- Entry of a parameter.
- Help information in the event of a fault.
Key
menu lights
feed lights
pause lights
flashes
cancel lights
flashes
lights
.

LCD/Menu Options

Parameters for configuring the printer are found in the Setup menu on the
printer. Your printer is mainly configured via the operating LCD display during
initial start-up and when making major changes to the operating conditions.
Changes required for processing different print jobs should be implemented
via software settings.
You can protect the Setup menu from unauthorized access with a code
number (PIN). Refer to Security on page 53 for additional information.
36
Display
Ready Ready
Ready Ready
Ready Ready
Print label Print label
Pause Pause
Correctable
error
Ready Ready
Print label Print label
Pause Pause
Correctable
error
Irrecoverable
error
Error
State
Enter the offline menu.
Feed a blank label.
Stop printer after the end of a print
job.
Reprint the last label.
Interrupt print job.
Printer goes into Pause state.
Continue print job. Printer goes into
Print label state.
Continue the print job after
rectifying the fault. Printer goes into
Print label state.
Delete internal memory. The last
label can no longer be reprinted.
Short press
print job.
Longer press
current print job and deletes all
print jobs.
Call help. Concise information for
rectifying the fault is displayed.
Function
cancels the current
cancels the