Operating The Application; Overview Of The Scenarios And Simulations - Siemens LOGO! 0BA7 Manual

6 Operating the Application

Operating the Application
6
The functionality of the LOGO! Set 23 were "packed" in an application example of a
cooling water system for an injection molding plant.
The functionalities and features of the program code and the hardware, can be
testes as follows, if the components have been configured correctly as described in
section 5.3.
6.1

Overview of the scenarios and simulations

The description how the controlling can be operated and monitored by means of
the integrated LOGO! display and LOGO! TD can be found in the following table in
the section "LOGO!".
The description how the controlled system can be simulated with S7-1200 and be
manipulated with a simulated KTP600 Basic color PN can be found in the following
table in the section "simulation".
The individual items for the operation of the application and simulation of the
controlled system are not subject to any specific order.
Table 6-1
Section Overview of the scenarios and simulations
LOGO! Scenario 1: Testing the wire electrode for level monitoring
Scenario 2: Changing the language and switching the backlight on/off
Scenario 3: Display values by means of LOGO! TD
Scenario 4: Change setpoint value by means of LOGO! TD operator
Scenario 5: Display values by means of LOGO! Display
Scenario 6: Observe the course of the controlling by means of
Scenario 7: Change control parameters
Simulation Simulation of the controlled system
Simulation of the controller parameters
Simulation of the "LOGO! 12/24RCE"
Simulation of the "LOGO! TD Text display"
Set23_RegSim
Entry ID: 23753479, V2.3.S,
via LOGO! TD
panel
LOGO!SoftComfort
02/2014
24