The Main Display; Setting Up The Ff-1; Speed - MGL Avionics Stratomaster Smart Single Manual

Fuel management system

Table of Contents

The main display

Fuel range

Fuel low

alarm level

Fuel level

Press the Menu key to enter the menu. You can move forward and backwards in the menu by

using the + and – keys. To change or select a menu item, move the highlight to the desired item

and then press the Menu key. To end an edit or function, press the Menu key again.

To exit the menu and continue normal operation, select the ***Done*** function and press the

Menu key. Note, all changes you have initiated during your session will only be remembered by

the instrument if you exit the menu using the ***Done*** function.

Enter your aircrafts cruising speed. This value will be used to calculate the fuel range, i.e. how far

you can fly with remaining fuel at zero wind speed. For this calculation, your current remaining

fuel, your current fuel flow and the speed entered here are taken into account.

You can easily change the speed during flight to reflect changes in ground speed or cruising

speed.

Use this function with care and do not use it to extend your range. You must at all times have a

secondary indication of available fuel. Note that flow senders and level senders may be subject to

malfunction that may result in incorrect fuel levels being displayed or calculated.

Fuel endurance

hours:minutes

Fuel flow

Remaining

fuel

Table of Contents

Do you have a question about the Stratomaster Smart Single and is the answer not in the manual?

Ff-1