Host Communication Networking Diagram - Emerson Liebert.PEX+ Series User Manual

5. Expand the SNMP node at the left side of the interface shown in Figure 6-13 and click Traps to set IP Address,
Port and Community of the NMS used for receiving Traps. After modifying, you must click Save to save the setting.

6.4 Host Communication Networking Diagram

The networking diagram of the TCP/IP communication card (SNMP protocol) is shown in Figure 6-14. The connection
number of air conditioner is not limited.
Figure 6-12 NMS configuration interface of SNMP host monitoring center (1)
Figure 6-13 NMS configuration interface of SNMP host monitoring center (2)
Liebert. PEX+Series Precision Air Conditioner
Chapter 6 Application Of INTELLISLOT
User Manual
63