3.4 Install RealPort
Download RealPort driver from Digi website
(http://www.digi.com/support/productdetl.jsp?pid=1916&osvid=57&tp=1&s=12)
Connect Ethernet cross-over cable (shipped with Digi gateway) to the PC and gateway and
power the gateway.
Run setup.exe
Select device with IP address 192.168.1.1 in the list
Compare the parameters of the next window with the figure below. Note: The starting COM
port may differ.
FLUKE 1743/1744/1745 Memobox – Power Quality Loggers
Communication via cellular networks
Figure 8
Figure 9
8 of 18