Test Communication With Fluke 174X - Fluke Memobox 1743 Manual

5 Test communication with Fluke 174x

Connect the Fluke 174x Memobox with the Digi gateway using the red serial cable.
Start PQLog
Click menu Settings – General
Choose serial port of RealPort (shown during RealPort installation or in device manager, see
chapter 3.5)
Click OK
Open Logger info window (click on Info about Logger)
If the window pops up the communication works!
If an error message appears it is likely working after closing all connections to the gateway:
o In web site click on Management – Connections
FLUKE 1743/1744/1745 Memobox – Power Quality Loggers
Communication via cellular networks
17 of 18