Alpha ESS SMILE-S6-HV Installation Manual page 31

zz
Attach the wall bracket to the wall using the screws with the tool of SW10 hexa-
3.
gon sleeve. Please use a level to ensure that the wall bracket is horizontal.
4. Hold the inverter by using the handles at two sides, attach the inverter onto the wall
bracket tilted slightly downwards. If the inverter is not aligned with the battery,
please increase or decrease PC gaskets to adjust it.
5. Tighten the wall bracket and the inverter with screw M6*16 (X 2) (tool: T20 screw-
driver, torque: 3.0Nm).
6. Make electrical connection (please refer to Section 错误!未找到引用源。 Electrical
Connection).
___________________________________________________________________
Alpha ESS Co., Ltd.
Your Smart Energy
Page 31 of 75