Mounting; Requirements For Mounting - Alpha ESS SMILE-S6-HV Installation Manual

zz
Battery Pack (X1)
Cardboard Limit
Board
(X1)
Screw M5*12
(X2)

6. Mounting

6.1

Requirements for Mounting

WARNING
Danger to life due to fire or explosion
Despite careful construction, electrical devices can cause fires.
• Do not mount the product in areas containing highly flammable materials or gases.
• Do not mount the product in potentially explosive atmospheres.
Basic Requirements
•
SMILE-S6-HV-INV (OUTDOOR) and SMILE-BAT-8.2PH (OUTDOOR) are
suitable for indoor and outdoor use.
SMILE-S6-HV-INV (INDOOR) and SMILE-BAT-8.2PH (INDOOR) are suitable for
only indoor use.
•
Do not install the inverter in a place where a person can easily touch it because
its housing and heatsink are hot during operation.
•
Do not mount the product in areas with flammable or explosive materials.
•
Do not mount the product at a place within children's reach.
•
Do not mount the product outdoors in salt areas because it will be corroded there
and may cause fire. A salt area refers to the region within 500m from the coast or
___________________________________________________________________
SMILE-BAT-8.2PH
Floor Gasket (X3)
Battery COM Cable
(X1)
Screw M6*6 (X2)
Alpha ESS Co., Ltd.
Your Smart Energy
Battery Positioning
Paper Plate (X1)
Wall Anchor
ST6*55 (X2)
Ring Terminal Lug
(X2)
Battery Wall Bracket
(X1)
Power Cable + (X1)
Power Cable - (X1)
Quick Installation
Guide (X1)
Page 23 of 75