Sunrise Medical Quickie Q700-UP M Instructions For Use Manual page 28

7.7.4 Delete custom programmed memory position
Refer to Fig.7.12 to 7.15
1. Remove the rear cover of the backrest and connect a
Switch with a 3.5mm Jack to the socket on the CxSM,
(Complex Seating Module) (A-Fig. 7.16).
2. Press the "Mode" button one or more times until a seat
icon appears in the LCD control panel display (Fig. 7.13).
3. Move the joystick to the left or right to select a memory
seat position (Fig. 7.14). A seat icon and the memory
description for the relevant position are shown in the
LCD control panel display (Fig. 7.13).
4. Press and hold the Switch connected to the CxSM
(Fig.7.15) and pull the joystick backwards for 6 seconds.
After 3 seconds you will hear the programming beep and
after 6 seconds you will hear a change in the beep sound.
5. As soon as you hear this new sound release the joystick
and the button. All memory positions are now set to the
factory setting
7.7.5 Return to drive mode
Press the "Mode" button one or more times until a standard
display image with speed indicator appears in the LCD control
panel display.
247556 Rev. A
Fig.7.12
Fig.7.13
Fig.7.14
Fig.7.15
28
A
Relax
Q700-UP M