Storage Environment - Liebert PEX+ Series User Manual

4 Chapter 1 Overview
such as an electric forklift to unload and move the equipment. If an electric forklift is used, insert the tines of the forklift such as an electric forklift to unload and move the equipment.
below the pallet, as shown in Figure
the obliquity within the range from 75° to 105°, proper incline, as shown in Figure 1-4. the obliquity within the range from 75° to 105°, proper incline, as shown in

1.5 Storage Environment

The storage environment of Liebert.PEX+
Item
General requirements
Ambient humidity
Ambient temperature
Storage time
1-3 to prevent the equipment from falling over. When moving the indoor unit, keep
Figure 1-3 Inserting and movement
Figure 1-4 Moving obliquity
Liebert.PEX+ meets the requirements of GB4798.1-2005. See
Table 1-2 Storage environment requirement
Indoor, clean, no dust Indoor, clean, no dust
5%RH to 85% %RH (non-condensing)
℃
-20℃ to +54℃
Total transportation and storage time should not exceed six months. Otherwise, the performance needs Total transportation and storage time should not exceed six months. Otherwise, the performance needs Total transportation and storage time should not exceed six months. Otherwise, the performance needs
to be re-calibrated calibrated
Liebert. PEX+Series Precision Air Conditioner Liebert. PEX+Series Precision Air Conditioner
If an electric forklift is used, insert the tines of the forklift
When moving the indoor unit, keep
2005. See Table 1-2 for details.
Requirement
User Manual