Vehicle Belt Installation - Cosco Scenera NEXT Manual

9. Check Belt
Tightness
Hold child
restraint at the
belt path with
your weakest
hand.
Push and pull from side to side.
If it moves more than 1 in. (2.5 cm),
try reinstalling the child restraint or try
another seating location.
41
4358-6590 Scenera NEXT.indd 47-48 4358-6590 Scenera NEXT.indd 47-48
To Remove
LATCH From
Vehicle Anchor
Remove child
from child
restraint.
Remove tension
from LATCH
belt by pushing
down on side of
child restraint
with LATCH
adjuster. Then
press adjuster button to loosen belt.
Unhook LATCH from bar by
squeezing spring lever and twist
hook.
Store LATCH when not in use.
See page 21.

Vehicle Belt Installation

Do not use LATCH along
with vehicle belts. Store
LATCH when using vehicle
belts.
Check vehicle belt before
each use. Use only if the
belt can be tightened
properly and securely.
Failure to follow these
warnings can result in
serious injury or death.
EASE OF USE TIP:
Make sure harness and
buckle fit your child
correctly before installing
the child restraint. See
pages 3-4.
1. Place
Child
Restraint
Forward
Facing
Flush
Against
Vehicle
Seat Back
42
continued on next page
10/1/14 10:17 AM 10/1/14 10:17 AM