Latch Installation - Cosco Scenera NEXT Manual

LATCH Installation

Review your vehicle owner's manual
for LATCH belt use.
Do not use LATCH along with
vehicle belts.
Check LATCH belt before each
use. Use only if the belt can
be tightened properly and
securely.
Store the tether hook when
used rear facing.
Failure to follow these
warnings can result in serious
injury or death.
29
4358-6590 Scenera NEXT.indd 35-36 4358-6590 Scenera NEXT.indd 35-36
EASE OF USE TIP:
Make sure harness and buckle fit
your child correctly before installing
the child restraint. See pages 3-4.
1. Remove
LATCH from
Storage
Location
2. Route LATCH
Belt Through
Rear-Facing
Belt Path
3. Reach Under
Pad and Pull
Hook Across to
1
Opposite Side
2
Do not twist
belt.
Belt MUST be in front of buckle strap.
You MUST use the 1st or 2nd buckle
slot.
Do not place belt over child's legs.
4. Finished
LATCH
Routing
LATCH adjuster
can be on either
side.
5. Place Child
Restraint
Rear Facing
in Back Seat
For children
who cannot sit
up unassisted,
the level line on shell MUST be
parallel with the ground.
For children who can sit up
unassisted, you may rotate the
child restraint to be more upright.
6. Hook
LATCH
to Vehicle
Anchor in
Seat Bight
continued on next page
10/1/14 10:17 AM 10/1/14 10:17 AM
30