Cosco Scenera NEXT Manual page 19

7. Tighten Belt
Place hand in
child restraint.
Firmly push down
and towards the
vehicle seat back
while pulling
free end of belt
to tighten.
It may be easier
to pull back
the pad and
tighten the belt
through the belt
path opening as
shown.
31
4358-6590 Scenera NEXT.indd 37-38 4358-6590 Scenera NEXT.indd 37-38
8. Check Belt
Tightness
Hold child
restraint at the
belt path with
your weakest
hand.
Push and pull from side to side.
If it moves more than 1 in. (2.5 cm),
try reinstalling the child restraint or try
another seating location.
9. Secure
Child in Child
Restraint
Recheck level
line.
Repeat steps 5-8
if level line is not
parallel with the
ground.
You may need
to place a large
rolled towel(s)
or foam pool
noodle(s) under
front of child
restraint to help make level line
parallel with the ground.
Check often to be sure padding is still
in place and the belt is tight.
To Remove
LATCH From
Vehicle Anchor
Remove child
from child
restraint.
Remove tension
from LATCH
belt by pushing
down on side of
child restraint
with LATCH
adjuster. Then
press adjuster button to loosen belt.
Unhook LATCH from bar by
squeezing spring lever and twist
hook.
Store LATCH when not in use.
See page 21.
10/1/14 10:17 AM 10/1/14 10:17 AM
32