Table of Contents
Advertisement
Performance and Specifications...
Front Panel Indicators
PSU A
PSU B
Primary Network
Secondary Network
Sync Locked
Sample Rate
Pull Up/Down
Signal Indicators
Clock Source
Network Modes
Redundant
Switched
Dimensions
Height
Width
Depth
Weight
Weight
Power
PSUs
Green LED. Illuminates when an AC input is applied and all DC outputs are present
Green LED. Illuminates when an AC input is applied and all DC outputs are present
Green LED. Indicates that a network connection is present on primary port when in
redundant mode. When in Switched mode, a valid network connection at either Primary or
Secondary network port will cause this LED to illuminate
Green LED. Indicates that a network connection is present on secondary port when in
redundant mode. Not used in switched mode
Green LED. When unit is network slave, shows valid network lock. When network master
shows unit is locked to indicated clock source. Flashing indicates invalid external clock
present and unit has reverted to internal clock
Orange LED for each: 44.1 kHz, 48 kHz, x2, x4
Orange LED. Indicates unit is set to operate on a Dante pull up/down domain
16 Green LEDs: 8 input/8 output indicators. Illuminate at -126 dBFS
Orange LED for each: Internal, Word Clock, DARS, Input 1–2, Input 9–10
Allows unit to connect to two independent networks
Connects both ports to integrated network switch allowing daisy-chaining of devices
44.5mm / 1.75" (1RU)
482.6mm / 19"
263mm / 10.35"
3.84 kg / 8.47 lbs
2 x Internal, 100-240 V, 50/60 Hz, consumption 30 W
16
Advertisement
Table of Contents
