Table of Contents
Advertisement
PERFORMANCE AND SPECIFICATIONS
I/O Level Trim
Input trim range
Output trim range
Input Sample Rate Converters
Sample Rate Range
Gain Error
Dynamic Range
THD+N
Latency
Digital Performance
Supported Sample Rates
Clock Sources
External Word Clock
Range
Rear Panel Connectivity
AES3
Channel Count
Input and Output
Alternate Input (optional
DARS)
Alternate Output
S/PDIF
Channel Count
Input
Output
Word Clock
Input
Output
PSU & Network
PSU
Network
Mute, then -78 dB to 0 dB in 1 dB steps (per channel)
Mute, then -78 dB to 0 dB in 1 dB steps (per channel)
32 to 216 kHz
-0.3 dB
> 138 dB (-60 dBFS method)
< -130 dB (0.00003%); 0 dBFS input
11 to 45 samples (network and input sample rate dependent)
44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz (-4% / -0.1% / +0.1% / +4.167%) at 24 bit
Internal, Word Clock, DARS, AES input 1-2, AES input 9-10 or from Dante Network Master
Nominal sample rate ±7.5%
16 x 16 AES3 channels
2 x DB25 connectors (AES59 Combined I/O / Tascam Digital)
1 x Female XLR-3 (replaces DB25 channels 1-2)
1 x Male XLR-3 (duplicates DB25 channels 1-2)
2 x 2 S/PDIF Channels (reduces AES3 input channels)
1 x RCA phono socket (replaces DB25 channels 3-4)
1 x RCA phono socket (switchable, duplicates any DB25 channel pair)
1 x BNC 75Ω (switchable termination)
1 x BNC 75Ω
2 x IEC Inputs with retaining clips
2 x etherCON NE8FBH, also compatible with standard RJ45 connectors
(Accommodates rugged etherCON NE8MC* – Does not mate with Cat 6 cable connector
NE8MC6-MO and NKE65* cable)
15
Advertisement
Table of Contents
