Table of Contents
Advertisement
Tools Menu . . .
AES3 Cut
Enable – On/Off toggle.
When the AES3 Output Cut is disabled, the device will always send information (a series of zeroes) on its AES3
outputs, making it impossible for downstream devices, such as amplifiers, to distinguish between 'mute' and 'fault'
state.
Enable Plug-in Control and Status – On/Off toggle.
Automatic Cut – Each channel pair an On/Off toggle. Can be switched separately or All 1-8, 9-16.
Channel pairs can be set to automatically cut the AES3 transmission from the device when there is a network
loss or clocking loss, meaning that downstream devices can identify a failure and deal with it appropriately.
Manual Cut – Each channel pair an On/Off toggle. Can be switched separately or All 1-8, 9-16.
13
Advertisement
Table of Contents
