Signal Routing; Clock; Srcs - Focusrite RedNet D16R MkII User Manual

Tools Menu . . .

Signal Routing

Input 1–2 from XLR – Tick option On/Off. Replaces channels 1–2 on the DB25 connector.
Input 3–4 from RCA – Tick option On/Off. Replaces channels 3–4 on the DB25 connector.
RCA Output Source – Only one can be selected at any time.
• Channels 1–2
• Channels 3–4
|
• Channels 15–16
AES70 – On/Off state.

Clock

Preferred Master – On/Off state.
RedNet Clock Source – Only one of the following can be selected at any time.
• Internal (RedNet is network master but running from internal clock)
• External – BNC Input (Word Clock)
• External – XLR Input (DARS or Audio)
• External – DB25 (Input pair 1)
• External – DB25 (Input pair 5)
Note: When selecting any clock source, RedNet D16R MkII will become a preferred master.
Word Clock Input Termination – Tick On/Off. (Terminates word clock input BNC with 75Ω.)
Word Clock Output – One can be selected at any time.
• Network
• Network (Base Rate)

SRCs

Sample Rate Converters – Each input channel pair an On/Off toggle. Can be switched separately.
• Channels 1–2
• Channels 3–4
|
• Channels 15–16
12