Table of Contents
Advertisement
RedNet Control 2 . . .
When a RedNet D16R MkII is added to a tab containing either 6 or 12 devices, the graphical controls
are separated into three pages: 'Meters', 'Inputs' and 'Outputs', with I/O split into channels 1-8 or
9-16.
'SRC' Indicates sample rate converters are switched in for an input channel pair.
Status Icons
Status icons for the PSUs and the network are shown at the left of each device window:
PSUs A & B – Each illuminates if PSU has power input and all DC outputs are present
Networks – Each illuminates if a valid connection is present
Locked – Unit is successfully locked to the network (changes to the red cross if not locked)
External Clock – Green: unit is locked to the external source, Yellow: unit is locking,
Red: unit is attempting to identify a network, Off: no network
Network Master – Illuminates if a unit is the network master
ID (Identification)
Clicking on the ID icon
Tools Menu
Clicking on the Tools
icon
will open
the System Settings
window. The Settings
are grouped into four
tabs:
'Signal Routing'
'Clock'
'SRCs'
'AES3 Cut'
The unit's hardware
and firmware details,
as well as the current
device settings, are
displayed in the left
pane of the window.
will identify the device being controlled by flashing its front panel LEDs.
11
Advertisement
Table of Contents
