Physical Characteristics; Power Requirements - Focusrite RedNet D16R MkII User Manual

Aes3 i/o
Table of Contents

Advertisement

Physical Characteristics

263 mm / 10.35"
RedNet D16R MkII dimensions are illustrated in the diagram above.
RedNet D16R MkII requires 1U of vertical rack space. Allow an additional 75mm of rack depth behind
the unit to allow for cables. Each unit weighs 3.84 kg and for installations in a fixed environment (eg.,
a studio rack), the front-panel rack mountings* will provide adequate support. However, if the unit
is to be used in a mobile situation (eg., flight-cased for touring, etc.), it is recommended that side
support rails or shelves are used within the rack.
*Always use M6 bolts and cage nuts specifically designed for 19" equipment racks. An Internet search using the
phrase "M6 cage nuts" will reveal suitable components.
RedNet D16R MkII generates little significant heat and is cooled by natural convection.
Note. The maximum operating environmental temperature is 50°C / 122°F.
Ventilation is via slots in the enclosure at both sides – ensure that when mounted in a rack the vents
are not obstructed. Do not mount RedNet D16R MkII immediately above any other equipment which
generates significant heat, for example, a power amplifier.

Power Requirements

RedNet D16R MkII is mains-powered. It incorporates 'Universal' power supplies, which can operate
on any AC mains voltage from 100 V to 240 V. The AC connections are made via a standard 3-pin IEC
connectors on the rear panel.
When PSU A & PSU B are both connected, PSU A becomes the default supply and therefore draws
more current than B. If a backup mains supply is provided from an uninterruptable source, it is
recommended that this is connected to inlet B.
Two mating IEC cables are supplied with the unit – these should be terminated with mains plugs of
the correct type for your country.
The AC power consumption of the RedNet D16R MkII is 30 W.
Please note that there are no fuses in RedNet D16R MkII, or other user-replaceable components of
any type. Please refer all servicing issues to the Customer Support Team (see "Customer Support
and Unit Servicing" on page 18).
465 mm / 18.3"
8
31.8 mm / 1.25"

Advertisement

Table of Contents
loading

Table of Contents