Preparing For Installation; Interior Assembly - Schlage Ease S1 SMART DEADBOLT Quick Start Manual

Exterior assembly
Keypad
Status
indicator
(Green/
Red)
Cylinder (S1 only)
Micro USB port

Interior assembly

Battery
cover
Reset
button
Thumb
turn
Master and User PIN codes have 4~10 digits. The
default master PIN code is [12345678]. Please
change it prior to programming of the lock.
Status Indicators
Green:
Unlocked or setting success
Red:
Locked or setting failed
Reboot button
Wireless
module
socket

Preparing for installation

1. Measure the dimension of the hole on your
door to ensure you have a 54mm hole, or
use the drilling template provided.
Spacer
2. Adjust the deadbolt.
NOTE: Bolt ships with backset in 60mm (2-3/8")
position. If required, turn the bolt case and pull
to extend to 70mm (2-3/4") backset position
(pictured below).
The bolt must be in retracted (unlocked)
position when you are changing backset.
Ø60mm
(2-3/8")
Ø70mm
(2-3/4")
No adjustment needed.
Ø54mm
(2-1/8")
Ø60mm
(2-3/8")
3