Table of Contents
Advertisement
BERT
Select BERT to perform a bit error rate test over the entire payload
bandwidth. Only one BERT test may be performed at a time.
Remote DS3 Loopback
This selection initiates a DS3 Loopback test for the remote unit. DS3
Loopback tests are described previously on page 6-3.
Remote Loopback with BERT
This selection initiates a DS3 Loopback test for the remote unit and
sends/checks the BERT pattern over the entire DS3 payload
bandwidth.
DTE Ports 1-4
Access the DTE port diagnostic options by selecting the number
corresponding with the desired port (2 through 5) from the main
D
61200217L1-1
menu. The menu in Figure 6-5 appears.
IAGNOSTICS
T3SU 300 User Manual
Figure 6-5. DTE Port Diagnostics Menu
Chapter 6. Diagnostics
6-5
Advertisement
Table of Contents
