Table of Contents
Advertisement
REMOTE SNMP MANAGEMENT APPLICATION
A remote T3SU 300 can be managed by a local management station
if the remote unit is assigned its own IP address. This address must
be assigned at both the near and far ends. Also, the D
option must be enabled on both units.
In this application example (shown in Figure 7-4) a local T3SU 300,
connected to the same LAN as the management station, provides
management access to a remote T3SU 300. The local unit has the
remote unit's IP address in its R
IP address is entered into the remote unit's L
field. Table 7-4 gives an example configuration for this application.
61200217L1-1
EMOTE
IP = 10.4.10.2
T3SU 300
IN SERVICE
CONTROL
IN SERVICE
IN SERVICE
REMOTE
IN TEST
IN SERVICE
IN SERVICE
IN TEST
IN TEST
ACTIVE
ALARM
IN TEST
IN TEST
ALARM
ALARM
LOS
ALARM
ALARM
LOS
LOS
LOS
NETWORK
DTE PORT 1
DTE PORT 2
LOS
DTE PORT 3
DTE PORT 4
T3SU 300
IP = 10.4.10.3
Figure 7-4. Remote Management Application
T3SU 300 User Manual
Chapter 7. Applications
ATALINK
IP A
field. That same
DDRESS
IP A
OCAL
DDRESS
IP = 10.4.10.3
T3
IN SERVICE
CONTROL
IN SERVICE
REMOTE
IN TEST
IN TEST
ACTIVE
ALARM
ALARM
LOS
LOS
NETWORK
DTE PORT 1
T3SU 300
T3SU 300
IN SERVICE
IN SERVICE
IN SERVICE
IN TEST
IN TEST
IN TEST
ALARM
ALARM
ALARM
LOS
LOS
DTE PORT 2
LOS
DTE PORT 3
DTE PORT 4
7-7
Advertisement
Table of Contents
