Draining Water Out After End Of Cycle; Stand-By Function - John Lewis JLBIWM1404 User Manual

Draining water out after end
of cycle
If you have chosen a programme or an option
that does not empty out the water of the last
rinse, the programme is completed, but:
• The time area shows
shows the door locked
• The indicator of the Start/Pause button starts
flashing.
• The drum still turns at regular intervals to
prevent creases in the laundry.
• The door stays locked.
• You must drain the water to open the door:
1. If necessary, touch the Spin button to decrease
the spin speed proposed by the appliance.
2. Press the Start/Pause button: the appliance
drains the water and spins.
The option indicator Rinse Hold
disappears.
If you have set Night
spin speed is not changed, when
you press the Start/Pause button,
the appliance only drains the water.
3. When the programme is completed and the
door locked indicator
open the door.
4. Press the On/Off button for a few seconds to
deactivate the appliance.

Stand-by function

The Stand-by function automatically deactivates
the appliance to reduce the energy consumption
when:
• You do not use the appliance for 5 minutes
when no programme is running.
Press the button On/Off to activate the
appliance again.
• 5 minutes after the end of the washing
programme.
Press the On/Off button to activate the
appliance again.
The display shows the end of the last
programme.
Turn the programme dial to set a new cycle.
36
and the display
.
or
and the
goes off, you can
If the dial is rotated to the "Reset" position
the appliance automatically turns off in 30
seconds.
If you set a programme or an
option that ends with water in the
drum, the Stand-by function
doesn't deactivate the appliance
to remind you to drain the water.
Washing Machine User Manual
,