Advertisement

Washing Machine
JLWM1437
User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the JLWM1437 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for John Lewis JLWM1437

  • Page 1 Washing Machine JLWM1437 User Manual...
  • Page 2: Table Of Contents

    Contents Child Lock Safety information Before first use Children and vulnerable people safety Daily use General Safety Safety instructions Activating the appliance Loading the laundry Installation Filling the detergent and additives Electrical connection Check the position of the detergent flap Water connection Setting a programme Starting a programme...
  • Page 3 Technical Data Repairs - after sales service...
  • Page 4: Safety Information

    Safety information Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
  • Page 5 The operating water pressure at the water entry point from the • outlet connection must be between 0.5 bar (0.05 MPa) and 8 bar (0.8 MPa). The ventilation opening in the base (if applicable) must not be • covered by a carpet, mat, or any floor covering. The appliance must be connected to the water mains using the new •...
  • Page 6: Safety Instructions

    Safety instructions cable need to be replaced, this must be carried Installation out by our Authorised Service Centre. • Connect the mains plug to the mains socket • Remove all the packaging and the transit bolts. only at the end of the installation. Make sure •...
  • Page 7: Service

    • Make sure that all metal objects are removed from the laundry. • Do not wash fabrics which are heavily soiled with oil, grease or other greasy substances. It can damage rubber parts of the washing machine. Prewash such fabrics by hand before loading them into the washing machine.
  • Page 8: Installation

    Installation Warning! Refer to Safety chapters. Unpacking Remove the external film. If necessary, use a cutter. 2. Remove the cardboard top and the polystyrene packaging materials. 3. Open the door. Remove all the items from the drum . 4. Put the front polystyrene packaging element on the floor under the appliance.
  • Page 9: Information For Installation

    5. Remove the polystyrene protection from the bottom. 6. Remove the power supply cable and the drain hose Put the appliance back into an upright position. from the hose holders. It is possible to see water flowing from the drain hose. This is because the washing machine has been tested at the factory.
  • Page 10 Warning! Do not put You can extend the drain hose to cardboard, wood or maximum 400 cm. Contact the equivalent materials below authorized service centre for the the appliance feet to adjust other drain hose and the extension. the level. It is possible to connect the drain hose in different ways: 2.
  • Page 11 stand pipe. prevent particles going into the appliance from the sink. 6. Position the hose directly to a built-in drain pipe in the room wall and tighten it with a clamp. 4. To a stand pipe with vent-hole - Insert the drain hose directly into a drain pipe.
  • Page 12: Product Description

    Product description Appliance overview 11 12 1. Worktop 2. Detergent dispenser 3. Control panel 4. Door handle 5. Rating plate 6. Drain pump filter 7. Feet for levelling the appliance 8. Drain hose 9. Inlet hose connection 10. Mains cable 11.
  • Page 13: Control Panel

    Control panel • The SensiCare System adjusts automatically Special features the programme duration to the laundry in the drum to achieve perfect washing results in the Your new washing machine meets all modern minimum possible time. requirements for an effective treatment of laundry with low water, energy and detergent consumption and respectful of fabric care.
  • Page 14: Display

    Display The Temperature area: Temperature indicator Cold water indicator Child safety lock indicator. Delay start indicator. Door locked indicator. The digital indicator can show: • Programme duration (e. g. • Delay time (e. g. • Cycle end ( • Warning code (e.g. Time Manager bars level indicator.
  • Page 15 The spin area: Spin speed indicator No Spin indicator. Spin phase is off. Washing Machine User Manual...
  • Page 16: Dial And Buttons

    Dial and buttons Introduction Spin When you set a programme, the appliance The options/functions are not automatically sets the maximum spin speed available with all washing allowed, except for programme Denim. With programmes. Check the this option you can change the default spin compatibility between options/ speed.
  • Page 17: Prewash

    Permanent Extra rinse The display shows the indicator . The door stays locked. The drum turns regularly to With this option you can add a few rinses reduce creasing. You must drain the water to according to the selected washing programme. unlock the door.
  • Page 18: Reduce Time

    After touching the Start/Pause button, the indicator display shows the indicator and the selected delay time and the appliance begins the countdown and the door is locked. Reduce time With this option you can reduce the programme duration depending on the load size and the ■...
  • Page 19: Programmes

    Programmes Programme Chart Programme Maximum Maxi- Programme description Default temper- spin speed (Type of load and soil level) ature Spin speed load Temperature range range [rpm ] Cotton 1600 rpm 8 kg White cotton and coloured cotton. Normal soil and 40 °C (1600- 400) light soil.
  • Page 20 Programme Maximum Maxi- Programme description Default temper- spin speed (Type of load and soil level) ature Spin speed load Temperature range range [rpm ] 1600 rpm 8 kg White cotton items. This programme removes micro-or- Anti-allergy (1600 - 400) ganisms thanks to a washing phase with the temperature 60 °C maintained above 60°C for several minutes.
  • Page 21 Programme Maximum Maxi- Programme description Default temper- spin speed (Type of load and soil level) ature Spin speed load Temperature range range [rpm ] 1200 rpm Outdoor 2 kg Do not use fabric softener and make (1200- 400) 30 °C sure that there is no softener residue in 1 kg 40 °C - Cold...
  • Page 22 Programme options compatibility Programme ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Cotton ■ ■ ■ ■ ■ ■ ■ ■ ■ Cotton eco ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Synthetics ■ ■...
  • Page 23: Settings

    Settings Acoustic signals This appliance has different acoustic signals, that operate when: • You activate the appliance (special short tune). • You deactivate the appliance (special short tune). • You touch the buttons (click sound). • You make an invalid selection (3 short sounds). •...
  • Page 24: Before First Use

    Before first use 1. Make sure that the electrical power is available and the water tap is open. 2. Pour a small quantity of detergent into the compartment marked by 3. Set and start a programme for cotton at the highest temperature without any laundry in the drum.
  • Page 25: Daily Use

    Daily use Warning! Refer to Safety chapters. Activating the appliance 1. Connect the mains plug to the mains socket. 2. Open the water tap. 3. Press the On/Off button for a few seconds to activate the appliance. A short tune sounds. The display shows the cycle duration.
  • Page 26: Check The Position Of The Detergent Flap

    Always follow the instructions that you find on the packaging of the detergent products, but we recommend that you do not exceed the maximum indicated level ( ). This quantity will however guarantee the best washing results. After a washing cycle, if necessary, remove any detergent residue from the detergent dispenser.
  • Page 27: Starting A Programme With The Delay Start

    2. After about 15-20 minutes the Reduce time The drain pump can operate bars disappear and new cycle duration is shortly before the appliance fills displayed. water. The appliance automatically adjusts the programme duration to the load to achieve Starting a programme with perfect washing results in the minimum possible time.
  • Page 28: Opening The Door - Adding Garments

    Opening the door - Adding Draining water out after end garments of cycle If you have chosen a programme or an option If the temperature and level of the that does not empty out the water of the last water in the drum are too high rinse, the programme is completed, but: and/or the drum is still rotating you cannot open the door.
  • Page 29 If you set a programme or an option that ends with water in the drum, the Stand-by function doesn't deactivate the appliance to remind you to drain the water. Washing Machine User Manual...
  • Page 30: Hints And Tips

    Hints and tips Stubborn stains Warning! Refer to Safety chapters. For some stains, water and detergent is not sufficient. The laundry load We recommend that you pre-treat these stains before you put the items in the appliance. • Divide the laundry into: white, coloured, Special stain removers are available.
  • Page 31: Water Hardness

    • If you pre-treat the stains or use a stain remover, set a programme with a low temperature. • To use the correct quantity of detergent, check the water hardness of your domestic system. Refer to "Water hardness". Water hardness If the water hardness in your area is high or moderate, we recommend that you use a water softener for washing machines.
  • Page 32: Care And Cleaning

    Care and cleaning the drum and the tub. This could generate bad Warning! Refer to Safety odours and mildew. To eliminate these deposits chapters. and clean the inner part of the appliance, run a maintenance wash regularly (at least once a month).
  • Page 33: Cleaning The Detergent Dispenser

    Add a small quantity of powder detergent cleaning, put the top part back into position. into the empty drum, in order to rinse out any left residues. Occasionally, at the end of a cycle the display may show the icon This is a recommendation to perform the “drum...
  • Page 34 • The drum does not turn. • The appliance makes an unusual noise because of the blockage of the drain pump. • The display shows the alarm code Warning! • Disconnect the mains plug from the mains socket. • Do not remove the filter while the appliance operates. •...
  • Page 35: Cleaning The Inlet Hose And The Valve Filter

    Warning! Make sure that the impeller of the pump can rotate. If it does not rotate, contact the Authorised Service Centre. Make sure also that you tighten the filter correctly to prevent leakages. Cleaning the inlet hose and the valve filter Washing Machine User Manual...
  • Page 36: Emergency Drain

    45° 20° Emergency drain If the appliance cannot drain the water, carry out the same procedure, described in 'Cleaning the drain filter' paragraph. If necessary, clean the pump. Frost precautions If the appliance is installed in an area where the temperature can reach values around 0°...
  • Page 37: Troubleshooting

    Troubleshooting Warning! Refer to Safety chapters. Introduction The appliance does not start or it stops during operation. First try to find a solution to the problem (refer to the table). If the problem persists, contact the Authorised Service Centre. In case of major problems, the acoustic •...
  • Page 38: Possible Failures

    Possible failures Problem Possible solution • Make sure that the mains plug is connected to the mains socket. • Make sure that the appliance door is closed. • Make sure that there is no damaged fuse in the fuse box. •...
  • Page 39 Problem Possible solution • Make sure that a washing programme that ends with water in tub, has been selected. • Make sure that the washing programme is finished. You cannot open the appliance • Set the drain or the spin programme if there is water in the drum. door.
  • Page 40: Consumption Values

    Consumption values Stated values are obtained in laboratory conditions with relevant standards. Different causes can change the data: the quantity and type of laundry and ambient tempera- ture. Water pressure, the supply voltage and the temperature of inlet water may also affect the washing programme duration.
  • Page 41 Technical Data Dimension Width/ Height/ Depth/ Total 600 mm/ 850 mm/ 547 mm/ 600 mm depth Electrical connection Voltage 230-240 V Overall power 2200 W Fuse 13 A Frequency 50 Hz Level of protection against ingress of solid particles and moisture IPX4 ensured by the protective cover, except where the low voltage equipment has no protection against moisture...
  • Page 42 Shopping is easy with John Lewis Shops manual, the next step is to contact John Lewis John Lewis, Aberdeen 01224 625 000 technical support on: John Lewis, Basingstoke 01256 406200...
  • Page 43 John Lewis, Croydon 020 8662 4730 John Lewis, Stratford 020 8532 3500 John Lewis, Horsham 01403 214 740 John Lewis, The Trafford Centre 0161 491 4040 John Lewis, Ipswich 01473 275 850 John Lewis, Watford 01923 244 266 John Lewis, Newbury 01635 263 980...
  • Page 44 ENVIRONMENTAL CONCERNS marked with the symbol with the household Recycle materials with the symbol . Put the waste. Return the product to your local packaging in relevant containers to recycle it. recycling facility or contact your municipal office. Help protect the environment and human health by recycling waste of electrical and electronic appliances.
  • Page 45 Washing Machine User Manual...
  • Page 46 Washing Machine User Manual...
  • Page 47 Washing Machine User Manual...
  • Page 48 192945890-A-292017 ( Subject to change without notice. )

Table of Contents

Save PDF