These warnings have been provided in the interest of safety. You MUST read them carefully before use or installation by a qualified person. If you are unsure of the meanings of these warnings contact the John Lewis branch from which you purchased the appliance. Installation ●...
Page 3
Maintenance and Cleaning Environmental Information ● For information on maintenance and cleaning your ● After unpacking please dispose of packaging with washing machine see pages 24 - 25 of this due regard to safety and the environment. instruction manual. ● Materials marked with the symbol Service recyclable.
Contents For the User For the Installer Important Safety Information Installation Installation Technical Specifications Child safety Unpacking Description of the Appliance Positioning Detergent dispenser drawer Installation on a suspended floor Child safety feature Plumbing in The Control Panel 12-16 Water inlet Water drainage Programme information Levelling...
Installation It is dangerous to alter the specifications or attempt to modify this product in any way. Care must be taken to ensure that the appliance does not stand on the electrical supply cable. Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.
Unpacking Fill the smaller upper hole and the two large ones with the corresponding plastic plug caps supplied in the bag containing the instruction booklet. All transit bolts and packing must be removed before using the appliance. Keep all packaging away from children. You are advised to keep all the transit bolts for re-use in case the machine is to be transported again.
Plumbing In 4. Set the hose correctly by loosening the ring nut. After positioning the inlet hose, be sure to tighten the Your new washing machine has been designed to be ring nut again to prevent leaks. permanently plumbed in to your home’s water supply 5.
Place the drain hose into your standpipe, which should have an internal diameter of approximately 38mm thus ensuring there is an air break between the drain hose and standpipe. ½ 38 mm ( ) standpipe diameter ½ P1197 Push the drain hose onto the spigot and secure with a clip, ensure a loop is formed in the drain hose (see diagram) to prevent waste from the sink entering the HEC0013...
Sprung wooden floors are particularly susceptible to vibration. For advice, consult a builder. If possible, always place the machine on a solid floor. In the interest of the environment Washing machines and dishwashers should be connected to the FOUL drainage system, the water will then be taken to a sewage works for treatment before being discharged safely into a river.
Electrical connection GREEN & YELLOW Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. WARNING: THIS APPLIANCE MUST BE BROWN EARTHED. BLUE CORD CLAMP P1041 The manufacturer declines any liability should this safety measure not be If you fit your own plug, the colours of the wires in the observed.
The control panel 14 Minute wash 90° Spin Economy 60° Drain 60° Rinse Economy 40° Soak 40° 30° 30° JLWM 1409 60° Hand wash Silk 40° Delicates 30° 30° Delicates 40° Automatic 3 4 5 6 7 8 9 10 11 1 Detergent dispenser drawer 3 Display The following pieces of information are shown on the...
Page 13
The washing machine has stopped with water 4 “Spin” button ● in the tub, at the end of the “Soak” or of a Press this button repeatedly to change the spin speed if programme with the “Rinse hold” or “Quiet” you want your laundry to be spun at a speed different option: this is indicated by a flashing zero.
Page 14
Child lock The prewash ends with a short spin in programmes for cotton and synthetic fabrics, whereas in the programme This function works in two different ways: for delicate fabrics the water is only drained. If enabled before the «Start/Pause» button is ●...
Page 15
The selected delay time value (up to 20 hours) will appear on the display for a few seconds, then the Door lock duration of the programme will appear again. The wash programme can be delayed from 30 min - 60 min - 90 min, 2 hours and then by 1 hour up to a maximum of 20 hours by means of this button.
Programme information Economy at the maximum speed. Important! This programme can be selected for slightly or normally The spin speed will automatically assume the setting for soiled cotton items. The temperature will decrease and cotton items. If required, reduce the speed to the the washing time will be extended.
Using the washing machine Before the first wash, we recommend that you run a Measure out the fabric softener cotton cycle at 90°C, without any laundry in the If required, pour fabric softener into the compartment machine, to remove any manufacturing residue from marked , without exceeding the «MAX»...
Select the spin speed, “No Spin”, “Rinse hold” or “Quiet” option Press the “Spin” button repeatedly in order to select the desired spin speed, “No Spin”, “Rinse hold” or “Quiet” option. Select the “Easy Iron” option When this option is selected, the laundry will be gently washed and spun to avoid creasing.
Start the programme Should it not be possible to open the door, and should it be absolutely necessary to do so, switch the machine Press the “Start/Pause” button. The relevant green off by turning the selector dial to “Off”. light will stop flashing. After a few minutes, you can open the door.
Hints and tips on washing ● Do NOT overload the machine. Weigh the laundry the When washing fabrics requiring different wash first few times you use the appliance. temperatures together, always select the lowest temperature. The average weights of the most common items are ●...
Wash care symbols Wash care labels inside garments recommend how to launder your clothes with the best results. The care labelling code is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the correct programme on your washing machine.
Washing programmes Consumptions* Programme/ Fabrics Available options Type of laundry Load Energy Water temperature litres Spin reduction/No Spin/Rinse Sheets, household 90° White hold/Quiet, Easy Iron, linen, towels, 7 Kg cotton Prewash, Intensive, Stain, Cottons tablecloths Extra rinse, Quick Economy Sheets, household Spin reduction/No Spin/Rinse White 60°...
Page 23
Washing programmes Consumptions* Programme Load Programme Available options Energy Water description litres Soak for about 40 7 Kg Soak minutes at 30°C 3 rinses Spin reduction/No Rinse Long spin at max. 7 Kg Spin/Rinse hold/Quiet, speed Easy Iron, Extra rinse Drain For emptying out the last rinse of the programmes...
Maintenance and cleaning You must DISCONNECT the appliance from the electricity supply, before you can carry out any cleaning or maintenance work. Descaling The water we use normally contains lime. It is a good idea to periodically use a water softening powder in the SM004 SM005 machine.
• When no more water comes out, unscrew the pump Clean the filter using a hard bristle brush. cover and remove it. Always keep a rag nearby to dry Tighten up the inlet hose. up spillage of water when removing the cover. P1231 P1115 The dangers of freezing...
Something not working Please carry out the following checks before contacting your local Service Force agent. IMPORTANT: if you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is under guarantee. During machine operation it is possible that the red Start/Pause pilot light flashes, one of the following alarm codes appears on the display and some acoustic signals sound to indicate that the machine is not working: : problem with the water supply...
5. The model and serial number of the appliance (found persons may cause injury or serious malfunctioning. on the rating plate - see picture) Contact your local John Lewis Branch. So that you always have these numbers to hand, we recommend you to make a note of them here.
Page 28
John Lewis Partnership 171 Victoria Street London SW1E 5NN 132 961 260 www.johnlewis.com 31/08...