Front Panel Connector; Hard Disk Led Connector (Hd_Led); Acpi Led Connector; Speaker Connector (Speaker) - QDI P4I865G User Manual

C h a p t e r C h a p t e r
C h a p t e r C h a p t e r C h a p t e r
Front Panel Connector:CN33

Hard Disk LED Connector (HD_LED)

The connector connects to the case's IDE indicator LED indicating the activity
status of IDE hard disk. The connector has an orientation. If one way doesn't
work, try the other way.
ACPI LED Connector (ACPI_LED)
The ACPI LED is a dual-color light with three pins. Pin1and Pin2 drive different
color lights. If Pin1 drives the orange light, then, Pin2 drives the green light, the
following status will come out. When the system is in S0 status, the LED is
green on. When the system is in S1 status, the LED is green blink. When the
system is in S3 status, the LED is yellow on. When the system is in S4, S5
status, the LED is off.

Speaker Connector (SPEAKER)

The connector can be connected to the speaker on the case.

Power LED Connector(PWR LED)

When the system is in S0 status, the LED IS on. When the system is in S1
12
status, the LED IS blin; When the system is in S3, S5 status, the LED IS off.
Reset Switch(RESET)
The connector connectes to the case's reset switch. Press the switch once,the
system resets.
GREEN LED Connector(GREEN LED)
When the system is in S0, S1, S5 status, the LED IS off. When the system is in
S3 status, the LED is on.
Hardware Green Connector(SLEEP SW)
Push once the switch connected to this header, the system enters suspend
mode.
Key Lock Connector(KEYLK)
The connctor can be connected to the keyboard lock switch on the case for
locking the keyboard.
2 2
2 2 2
P4I865G/P/PEA User'S Manual
Intallation Instuctions Intallation Instuctions Intallation Instuctions
Intallation Instuctions Intallation Instuctions