QDI P4I865G User Manual page 11

C h a p t e r C h a p t e r C h a p t e r 1 1 1
C h a p t e r C h a p t e r 1 1
Provides new 3D features create real-life enviroment and character effects
AGP 3.0 Interface with 4X or 8X data transfers and 4X or 8X fast write
Onboard Serial ATA
Supports hot-plug
Two SATA devices including SATA HDD and CDROM/DVDROM devices
150Mbps transfer rate
Supports Raid0,Raid1(-R )(optional)
Onboard 1394 (Optional) (-F)
Supports hot-plug
Supports 400Mbps transfer rate
Two 1394 devices including HDD and CDROM/DVD ROM devices(Optional)
PC link easy under WinMe or WinXP
Onboard LAN (Optional)
10/100 Mbit/sec Ethernet support(-L)
LAN interface built-in on board
10M/100M/1G LAN interface (Optional) (-K)
USB 2.0 Ports
Supports hot-plug
One EHCI Controller and four UHCI Controllers (Expanded capabilities for
eight, USB 2.0 ports)
USB 2.0 compliant, operates at 480Mbps, about 40X times faster than USB
1.1 which currently works at a snails pace of just 12Mbps
Supports wake-up from S1 (Power on suspend), S3(Suspend to RAM)
Onboard Audio
AC'97 2.2 Specification Compliant
Provides onboard Line-in Jack, Microphone-in Jack, Speaker-out Jack with
onboard amplifier
Supports S/PDIF output/input
Supports 5.1 channels Audio
Onboard I/O
One floppy port supports up to two 3.5
720K/1.2M/1.44M/2.88M format
One high speed 16550 compatible UARTs (COM1/COM2/COM3/COM4
selective) with 16 byte send/receive FIFO
One parallel port supports SPP/EPP/ECP mode
Infrared interface, Smart Card Reader interface (Optional)
All I/O ports can be enabled/disabled in the BIOS setup
''
or 5.25
P4I865G/P/PEA User'S Manual
Introduction Introduction Introduction
Introduction Introduction
''
floppy drives with 360K/
3