Product Connection Define And Method - Novusun CNC MACH3 Manual

2.2 Product connection define and method

Figure2-2.
As the Figure 2-2 showed, the connection of the controller includes power supply interface,
Ethernet connection interface, Stepper/Servo control output interface, spindle control output
interface, Estop and limited switch and tool setting input interface and so on. Now we descript
them in details as below.
2.2.1
Ethernet port
As Figure 2-2 showed,No.1 terminal block is Ethernet port, you can connect with the
computer through this interface. Then mach3 can control this card.
2.2.2 Stepper motor controller port
As Figure 2-2 showed,No.2 terminal block is steppermotor controller port, which is define as
Manual of NVEC400
Product wiring section and interface summary
- 7 -
www.nvcnc.net