Table of Contents
Advertisement
Chapter 1.
1.1 Product Introduction
Novusun CNC has engaged in the Numerical control industry for 7 years, specialized in
the research, development and production of various CNC controller systems with high quality
and high reliability. We produce the Brushless DC motor, Stepper motor driver, and also 1 to 6
axis CNC motion controllers.。
NVEC400 is the 6 axis motion controller we spend 1 years to design.
NVEC400 support Mach3 software, through ETHERNET port to communicate with
computer.
This manual introduces operation, connection and usage schedule of our professional
motion controller for engraving machine. Through a lot of the drawing the users can learn
quickly how to use this motion controller.
1.2 Products specification
Support Ethernet port;
16 ports photoelectric isolated input interface；
1 2 ports photoelectric isolated output interface；
1 port 0-10V spindle speed analog output interface(can change to PWM output)；
2 relay output.
can support 6 axis stepper systems,400KHz pulse output for every axis；
ARM motion control chip；
main device is 12V-32VDC power supply input, current should higher than 1A；
Manual of NVEC400
Introduction
- 1 -
www.nvcnc.net
Hide quick links:
Advertisement
Table of Contents
