Genie GR-12 Operator's Manual page 48

Operator's Manual
Operating Instructions
Observe and Obey: Lift Tools
Work Tray Installation

Lift Tools Work Tray must be installed on the
inside of the platform.

Only one Lift Tools Work Tray can be used per
machine.

Mount Lift Tools Work Tray on the top of the
Platform Support near the mast only.

Be sure the Lift Tools Work Tray is secured to
the Platform Support.

Lift Tools Work Tray lanyard is for tools only.
Do not attach personal safety lanyard.
Lift Tools Work Tray Operation
1 Place the load so that it rests inside the Lift
Tools Work Tray.
The Lift Tools Work Tray assembly weighs
4 lbs / 1.8 kg.
Maximum capacity of Lift Tools Work Tray is
50 lbs / 23 kg.
Tip-over hazard. The weight of Lift Tools Work
Tray assembly and the load in the Lift Tools
Work Tray assembly will reduce the rated
platform capacity of the machine and must be
factored into the total platform load.
46
After Each Use
1 Select a safe parking location—firm level
surface, clear of obstruction and traffic.
2 Lower the platform.
3 Turn the key switch to the off position and
remove the key to secure from unauthorized
use.
4 Charge the batteries.
™ -12 • GR ™ -15 • GR
GR
Sixth Edition • First Printing
™
-20 Part No. 1297723GT