Genie GR-12 Operator's Manual page 20

Operator's Manual
Work Area Safety
Collision Hazards
Be aware of limited sight
distance and blind spots
when driving or operating.
Be aware of extended platform position when
moving the machine.
The machine must be on a level surface and
wheels chocked or secured before releasing the
brakes.
Operators must comply with employer, job site,
and governmental rules regarding use of personal
protective equipment.
18
Check the work area for
overhead obstructions or
other possible hazards.
Be aware of crushing
hazards when grasping
the platform guard rail.
™ -12 • GR
GR
Observe and use color-coded direction arrows on
the platform controls and the platform decal plate
for drive and steer functions.
Do not operate a machine in the path of any crane
or moving overhead machinery unless the controls
of the crane have been locked out and/or
precautions have been taken to prevent any
potential collision.
No stunt driving or horseplay while operating a
machine.
™ -15 • GR ™
-20
Sixth Edition • First Printing
Do not lower the platform
unless the area below is
clear of personnel and
obstructions.
Limit travel speed
according to the condition
of the ground surface,
congestion, slope,
location of personnel, and
any other factors which
may cause collision.
Part No. 1297723GT