Genie GR-12 Operator's Manual page 46

Operator's Manual
Operating Instructions
Tilt Sensor Activation Settings
Chassis Angle (side to side)
Chassis Angle (front to back)
If the tilt alarm sounds while
raising the platform, lower the
platform and move the machine
to a firm, level surface. If the tilt
alarm sounds when the platform
is raised, use extreme caution to
lower the platform.
When the platform controls LED
readout displays LL, the ground
controls LCD displays LL:
Machine Tilted, and the tilt
alarm sounds at 180 beeps per
minute, the following functions
are affected: drive, steer, and
elevate functions are disabled.
Return the machine to level
ground to restore lift functions.
Operation from Ground with Controller
Maintain safe distances between the operator,
machine and fixed objects.
Be aware of the direction the machine will travel
when using the controller.
44
Battery Level Indicator
1.5°
Use the LED diagnostic readout to determine the
battery level.
3°
Note: When a blinking LO code appears on the
platform controls LED display, the machine must
be taken out of service and charged, otherwise all
machine functions will be disabled.
™ -12 • GR ™ -15 • GR
GR
Sixth Edition • First Printing
™
-20 Part No. 1297723GT
Full Charge
Half Charge
Low Charge
LO Flashing