Genie GR-12 Operator's Manual page 43

Sixth Edition • First Printing
To Steer
1 Press the drive function button. On the LED
screen, a circle below the drive function
symbol will turn on.
If the control handle is not moved within seven
seconds of pushing the drive function button, the
circle below the drive function symbol will turn off
and drive function will not operate. Press the drive
function button again.
2 Turn the steer wheels with the
thumb rocker switch located on
the top of the control handle.
To Drive
1 Press the drive function button. On the LED
screen, a circle below the drive function
symbol will turn on.
If the control handle is not moved within seven
seconds of pushing the drive function button, the
circle below the drive function symbol will turn off
and drive function will not operate. Press the drive
function button again.
2 Press and hold the function enable switch on
the control handle.
3 Increase speed: Slowly move the control
handle off center.
Decrease speed: Slowly move the control
handle toward center.
Stop: Return the control handle to center or
release the function enable switch.
Part No. 1297723GT
Use the color-coded direction arrows on the
platform controls and on the platform to identify the
direction the machine will travel.
Machine travel speed is restricted when the
platform is raised.
Battery condition will affect machine performance.
Machine drive speed and function speed will drop
when the battery level indicator is flashing.
To select drive speed
The drive controls can operate in two different
drive speed modes. When the drive speed button
light is on, slow drive speed mode is active. When
the button light is off, fast drive speed mode is
active.
Press the drive speed button to select
the desired drive speed.
Note: When the platform is elevated,
the drive speed button light is always
on, indicating elevated drive speed.
™ -12 • GR ™ -15 • GR
GR
Operating Instructions
™
-20
Operator's Manual
41