Section 5
Use of LHMI
5.2
5.2.1
5.2.2
48
LHMI menu navigation
Default screen
The default view of the relay displays the largest phase current and earth current
which is indicated in Fig. 10. The relay returns to default screen after 5 minutes if
no key is pressed.
Current values are displayed in this view for phase current and earth current in "A"
as shown in following figure.
Iph
:
XX A
I0
:
XX A
Figure 14: Default screen of relay REF601 / REJ601 / REM601
Main menu
The main menu appears after entering the password with the user rights depended
on the entered password. Following view shows the main menu of the relay.
Main Menu
Measurements
Fault Record
Events
Settings
Configuration
Test
Access Level
Version Info
Figure 15: Main menu of relay REF601/REJ601/REM601
1MDU07212-YN Rev. D
REF601 / REJ601 / REM601
Application Manual