ABB Relion 605 Series Applications Manual page 19

1MDU07212-YN Rev. D
REF601 / REJ601 / REM601
Application Manual
Table 3: List of event types and related description, continue
Sr.
Event type
No.
4 Protection start
5 Protection trip
6 IRF
7 Breaker open
8 Breaker close
9 Remote trip
10 Reset
REF601/REJ601/REM601 overview
Description
Start event by I>,I>>, I>>> ,Io> OR Io>> will
be captured as individual event for both
rising and dropping
On I2> start both rising and falling signal
On I2/I1> start both rising & falling signal
On thermal alarm output signal for both rising
& falling signal
On phase reversal start
On start of motor output activation and
deactivation
In the event of Tripping, which protection
stage (I>, I>>, I>>>, Io> and Io>>) caused
trip will be captured as an event information.
Event shall be available for both rising &
dropping
On I2> trip both rising & falling signal
On I2/I1> trip both rising & falling signal
On undercurrent trip
On phase reversal trip
On trip output activation & deactivation due
to either stall protection or I2t protection
On thermal trip output signal for both rising &
falling signal
"IRF" – internal relay fault shall be captured
as an event.
When breaker open cmd
When breaker close cmd
When remotely trip command issued
When reset of protection trip, LEDs and
screen done
Section 2
Data considered
Start I> ↑
Start I>> ↑
Start I>>> ↑
Start I0> ↑
Start I0>> ↑
Start I> ↓
Start I>> ↓
Start I>>> ↓
Start I0> ↓
Start I0>> ↓
Start I2> ↑
Start I2> ↓
Start I2/I1> ↑
Start I2/I1> ↓
3Ith> Alarm ↑
3Ith> Alarm ↓
I2R> Start ↑
I2R> Start ↓
I2tn< Mstr ↑
I2tn< Mstr ↓
Trip I> ↑
Trip I>> ↑
Trip I>>> ↑
Trip I0> ↑
Trip I0>> ↑
Trip I> ↓
Trip I>> ↓
Trip I>>> ↓
Trip I0> ↓
Trip I0>> ↓
Trip I2> ↑
Trip I2> ↓
Trip I2/I1> ↑
Trip I2/I1> ↓
3I< Trip ↑
3I< Trip ↓
I2R> Trip ↑
I2R> Trip ↓
tall Trip ↑
Stall Trip ↓
I2t Trip ↑
I2t Trip ↓
3Ith> Trip ↑
3Ith> Trip ↓
IRF codes
Breaker Open
Breaker Close
Remote Trip
Reset
13